Marine Grade Laminating Epoxy
Marine Grade Laminating Epoxy
Marine Grade Laminating Epoxy
Marine Grade Laminating Epoxy
Marine Grade Laminating Epoxy
Marine Grade Laminating Epoxy

Marine Grade Laminating Epoxy

Same day shipping on orders placed Mon-Fri by 4pm.
Your Price: $124.99

Description

General Info:

Marine Grade Polymer coating for concrete pavements, wood, fiberglass and other surfaces requiring a clear coating.  Our Epoxy is a field installed system that consists of a specially formulated 2 component epoxy binder that is mixed and applied to a surface. Forms a highly durable wear and water-resistant surface that is semi-flexible, impact resistant, and resistant to traffic, fuel, oil, and mild acids. 

Components:

Composed of a resin and hardener supplied in a 1 or 2-gallon kit.

Our epoxy Resin resin is a 100% solids no VOC, 2 Component, self-leveling, primeless, low odor, non-blushing epoxy that provides a sufficient work life, rapid tack free time and high adhesion to aggregates and pavements.  Each kit includes both pre-proportioned Resin (Part A) and Hardener (Parts B) which are mixed at 1 parts resin to 1 part hardener by volume.  To Use, the Hardener (Parts B) is added to the Resin (Part A) and then mixed immediately prior to use.  VOC = 0 g/l.

Installation:

Installation of is summarized as follows. The 2 components are mixed, and then uniformly applied at the desired thickness typically 20 mils to the cleaned and prepared surface.  Our Epoxy should be cured at a minimum of 3 hours at 77°F before contact.

 

Marine Grade Laminating Epoxy