Marine Grade Polymer coating for concrete pavements, wood, fiberglass and other surfaces requiring a clear coating. Our Epoxy is a field installed system that consists of a specially formulated 2 component epoxy binder that is mixed and applied to a surface. Forms a highly durable wear and water-resistant surface that is semi-flexible, impact resistant, and resistant to traffic, fuel, oil, and mild acids.
Composed of a resin and hardener supplied in a 1 or 2-gallon kit.
Our epoxy Resin resin is a 100% solids no VOC, 2 Component, self-leveling, primeless, low odor, non-blushing epoxy that provides a sufficient work life, rapid tack free time and high adhesion to aggregates and pavements. Each kit includes both pre-proportioned Resin (Part A) and Hardener (Parts B) which are mixed at 1 parts resin to 1 part hardener by volume. To Use, the Hardener (Parts B) is added to the Resin (Part A) and then mixed immediately prior to use. VOC = 0 g/l.
Installation of is summarized as follows. The 2 components are mixed, and then uniformly applied at the desired thickness typically 20 mils to the cleaned and prepared surface. Our Epoxy should be cured at a minimum of 3 hours at 77°F before contact.